FOR EXTREME PROTECTION, AND EXTREME PERFORMANCE, UNDER EXTREME CONDITIONS, YOU NEED EXTREME SCIENCE.

To go big, you have to go nano meter small.

You have to go to where metal meets metal. Where friction creates heat and causes wear. Where pressure builds and performance lags.

Formulated with specially engineered nanoparticles, NanoProMT’s advanced products penetrate deeper, to lubricate where it counts — at the metal-to-metal interface, at the nano level.

No other lubricants protect as completely because no other lubricants can penetrate to the nano level where friction, heat, wear and corrosion occur.

MILITARY TOUGH, MILITARY-TESTED

Where mission is critical, failure is not an option.

In the heat of combat, machinery must perform under pressure. It must take the heat, literally, and operate at temperatures most machines never reach: from -42° below to 356° F. Equipment failures can cost lives and millions of dollars.

Working in conjunction with the military and with Boeing Phantom Works, NanoProMT is engineering product specifically designed to meet strict requirements and rigorous demands of cutting-edge institutions. And we’ve been put to test, undergoing extensive lab- and field-testing that has led to military-grade formulas being applied to all NanoProMT products.

  • U.S Army Rdecom
  • Boeing
  • Amrdec

FIELD-TESTED, INDUSTRY-APPLIED

NanoProMT performs in the most extreme industries and applications, including heavy-wear machinery and hardware. With extended use over time and prolonged exposure to high heat, standard lubricants break down and stop protecting. But our specially engineered nanoparticles eliminate these problems, delivering superior penetration for complete coverage that protects longer without altering any dimensional surface tolerance.

  • Aerospace
  • Agriculture
  • Automotive
  • Construction
  • Manufacturing
  • Mining and drilling
  • Marine
  • Material handling
  • National defense
  • Trucking

MILITARY TOUGH, ROAD READY

The average Class 8 highway truck logs 68,000 miles a year. That's kind of milage can cause extreme wear on an engine, wheel bearings, and other essential parts. Like the fifth wheel plate and locks that are too often under-lubricated that can prevent the king pin from securely latching and the trailer from pivoting and cause a serious accident, under normal operating conditions. But when proper lubricated, up to 95% of fifth wheel "on road" failures can be eliminate. NanoProMT protects and lubricate deep reducing friction to extend duty cycles, improve fuel economy, and reduce breakdown and accident.

NanoProMT oil additive is FIELD-PROVEN on Mack MP7 diesel engines, extending oil change intervals by 3 times for a cost savings of over $1,000 by eliminating replacement oil, filters and labor per vehicle. At just $130 a bottle, that’s a 675% ROI. Let us show you how NanoProMT can drastically eliminate maintenance cost for your fleet.

*Results obtained in third party testing.

MILITARY TOUGH, RACE READY

Race engineers log hundreds of hours and spend millions of dollars on wind-tunnel and track testing to find performance gains measured in fractions of a percent. Running NanoWater in race vehicles can improve heat rejection by 30%, dropping the operating water temperature by up to 5ºF*. In an environment where every bit counts, these types of gains can make the difference between finishing first, and not finishing at all.

NanoWater is field-proven, used in the Rolex Grand-Am sports car series for two seasons for marked thermal gains. This improved performance allowed the team to use less air for the same engine cooling, resulting in less drag for higher straightaway speeds and more downforce for higher corner speeds. Let us show you how NanoProMT can also give your team an edge.

*Results obtained in third-party testing with the RAM & System Assessment Division
of the U.S. Army.

MILITARY TOUGH, FLIGHT READY

Aircraft must perform in the severe temperatures of frozen runways, hot desert airstrips, and everything in between. NanoProMT delivers universal high performance under these extreme operating conditions to protect highly stressed, flight-critical rotating components. Our aviation grease can increase thermal conductivity by 39% and reduce scarring by 28% over standard aviation grease, drastically reducing friction and wear to keep aircraft flight-ready and operating safely, longer.*

NanoProMT Aviation Gear Oil is FIELD-PROVEN and specially formulated for the AH-64 Apache helicopter to reduce the operating temperature of the gearbox by 40-50˚ F. This improved performance allows the military to stay in flight for extended missions, run at higher RPMs, and perform fewer maintenance cycles. Let us show you how NanoProMT can also give your team an edge.

*Results obtained in third-party testing with the RAM & System Assessment Division of the U.S. Army and the ASTM D2266 4-ball testing protocol.

MILITARY TOUGH, ROAD READY

The average class 8 highway truck logs 68,000 miles per year. That kind of mileage can cause extreme wear on the engine, wheel bearings, and other essential parts like the fifth wheel plate and locks. Under lubrication of the fifth wheel can prevent the king pin from securely latching and the trailer from pivoting – potentially causing a serious accident under normal operating conditions. But when properly lubricated, up to 95% of fifth wheel “on road” failures can be eliminated. NanoProMT protects and lubricates deep – reducing friction to extend duty cycles, improving fuel economy, and reducing breakdowns and accidents.

Nano ProMT oil additive is FIELD-PROVEN on Mack MP7 diesel engines, extending oil change intervals by 3 times for a cost savings of over $1,000 by eliminating replacement oil, filters and labor per vehicle. At just $130 a bottle, that’s a 675% ROI. Let us show you how NanoProMT can drastically eliminate maintenance cost for your fleet.

*Results obtained in third party testing.

MILITARY TOUGH, WATER READY

Specially created for marine applications, such as wheel bearings, water pumps, hinges, winches, and chain reels, NanoProMT’s water-insoluble formula provides the highest grade (1A*) protection against oxidation and corrosion, even in the harshest marine environments, with maximum stability and load-bearing protection of up to 800 kg (twice that of traditional lubricants)*.

NanoProMT is FIELD-PROVEN in one of America’s largest family indoor water parks, with pumps running 250 gallons of water per minute, year-round to entertain guests. That’s a lot of pressure. Our Marine Grease meets the challenge, reducing bearing loads and amperage, resulting in 67% less annual maintenance, and NO catastrophic failures. Let us show you how NanoProMT can also keep you up and running.

* Results were obtained in compliance with ASTM D2596 4-ball wield load-testing and ASTM 1732 rust-testing protocols.

NanoProMT products undergo rigorous third party testing to guarantee performance under the most extreme conditions.

Extreme Friction of High Performance Engines

Nanoparticles convert sliding friction to rolling friction, for reduced wear, less heat, and higher efficiency. Third-party 4 Ball Wear testing proves our superiority in handling pressure and reducing friction for reduced wear.

Extreme Cold to Extreme Heat

NanoProMT has a thermal stability 300 times higher than the standard lubricant, which allows it to perform at operating temperatures most machines will never reach: -42o F to 356o F. All of our products provide superior pump-ability at low temperatures for cold start performance, and maintain their viscosity when heated, with unsurpassed dropping point temperatures.

Extreme Pressure

NanoProMT protects against spalling, galling, and scarring for superior load bearing and protection against wear, as shown by our oil stabilizers, which reduce scarring by 25%, and our automotive gear oil that improves load- bearing capacity by 20% over standard oils.*

Extreme Environments

By protecting at the atomic level, where air and moisture oxidize and destroy metal, NanoProMT’s Marine Grease received the highest ASTM grade (1A*), proof that it can defend against oxidation and galvanic corrosion, as well as air, moisture, salt, and sand, which cause rust and friction, even under the harshest marine conditions.

NANOPROMT PRODUCTS SHATTER THE LIMITS OF HIGH PERFORMANCE.

We’re redefining high performance in lubricants, greases, and hydraulic fluids. All NanoProMT products deliver universal high performance at temperature- and environmental-operating thresholds 3X greater than standard lubricants to better protect and preserve equipment from friction, heat, pressure, and corrosion at the nano level.

Browse our products:

  • High Temp EP Grease
  • Marine Grease
  • Oil Stabilizer
  • Gear Oil
  • Penetrating Lubricant
  • Dry Lubricant
  • Hydraulic Fluid

Download Product
Information PDF

High Temp EP Grease (NDT14GR)

Multi-purpose lubricant with lithium complex that withstands the heat and pressures of high performance equipment. And meets NLGI 2 grade requirements for extreme pressure grease, ideal for tough applications where water resistance is critical.

  • Low temperature pump-ability (available in “Keg” sizes of 60, 120, 250 lbs plus).

  • Operates in extreme temperatures from -22° F to 302° F.

  • Extremely chemically, thermally, and structurally stable.

  • Protects against rust, corrosion and wear at the nano level.

  • Extends maintenance cycles and improves equipment efficiency for energy savings.

  • Low friction coefficient.

* All results were obtained through Independent third-party testing, subject to ASTM standards.

High Temp EP Grease (NDT14GR)

Multi-purpose lubricant with lithium complex that withstands the heat and pressures of high performance equipment. And meets NLGI 2 grade requirements for extreme pressure grease, ideal for tough applications where water resistance is critical.

  • Low temperature pump-ability (available in “Keg” sizes of 60, 120, 250 lbs plus).

  • Operates in extreme temperatures from -22° F to 302° F.

  • Extremely chemically, thermally, and structurally stable.

  • Protects against rust, corrosion and wear at the nano level.

  • Extends maintenance cycles and improves equipment efficiency for energy savings.

  • Low friction coefficient.

  • * All results were obtained through Independent third-party testing,
    subject to ASTM standards.
    Download Safety Data Sheet

Marine Grease (NDT14MG)

Designed for highly corrosive marine environments, NDT14MGs water insoluble formula provides long lasting protection from friction, corrosion, rust and wear, over a broad temperature range.

  • Water-insoluble formula.

  • From light to heavy duty trailer with wheel bearings that exceed 10,000 lbs.

  • Up to 400% more load carrying ability over conventional lubes.

  • Excellent thermal stability and oxidation resistance.

  • Extends maintenance cycles.

Download Safety Data Sheet

OIL STABILIZER (NDT32OS)

Protects vital engine components against friction and engine wear: reducing oil temperature 60% faster than standard lubricants, dry starts and viscosity breakdown for improved horsepower and oil pressure, and extended oil life by 100%.

  • Blend of nano materials suspended in high quality synthetic oils.

  • Anti-friction oil stabilizer for auto, RV, class 8 trucks and industrial motors.

  • Improves efficiencies with anti-wear and viscosity enhancements.

  • 11% Increase in thermal conductivity.

  • 20% increase in load capabilities (ASTM D3733 Falex EP test).

  • 40% reduction in scarring (ASTM D4172 4 ball wear test).

Download Safety Data Sheet

Gear Oil (NDT32OS)

Specially designed for conventional and high performance applications: auto, truck, marine, racing and heavy equipment axles where factory-fill or drain-and-fill levels of limited slip performance are required.

  • Provides extreme pressure protection and load carrying capacity.

  • High performance corrosion protection.

  • Superior thermal stability with anti-foaming to increase performance.

  • 20% increase in load capacity to failure (ASTM D3733).

  • 40% reduction in scarring (ASTM D2266 4 ball wear test).

  • 11% increase in thermal conductivity.

Download Safety Data Sheet

PENETRATING Lubricant (NDT11P)

Goes deeply into spaces between metal to metal rusted mechanical parts, such as nuts and bolts to decrease maintenance, reduce wear and friction, and prevent future corrosion.

  • General purpose lubricant, cleaner and corrosion stopper.

  • Speeds maintenance activities while providing a barrier to future corrosion.

  • Foaming action and excellent creep properties for 100% coverage.

  • Penetrates rust and allows for fast removal of friction welded components.

  • Resistent to moisture and chemicals.

  • Nonflammable.

Download Safety Data Sheet

DRY LUBRICANT (NDT11D)

The first "true" Nano technology field serviceable spray. NCT11D point-of-use lubricate with moisture-displacing formula reduces friction and wear, preventing fretting and galling even in extreme pressure and high temperature applications.

  • Universal application for industrial, commercial and house hold (indoor/outdoor).

  • Protects against corrosion and reduces friction.

  • CFC and Trichloroethane free aerosol dries fast and clean, with no oily residue.

  • Stays put without squeezing out like liquid lubricants.

  • May be used as a cleaning agent (oxidized contacts, corrosion, and more).

Download Safety Data Sheet

NanoProMT Readily Biodegradable Hydraulic Fluid

Formulated for most high pressure hydraulic systems with performance additive chemistry and Nano material technology to exceed the requirements of traditional petroleum based synthetic hydraulic fluids, without effecting the environment.

  • Meets most MIL performance specifications for environmentally safe AW hydraulic fluids.

  • Operates from minus 42° F to 356°F.

  • Exceptional oxidation and increased thermal properties.

  • Enhanced wear protection and longer life cycles than conventional petroleum hydraulic oils.

  • Reduces environmental impact in the event of a leak or spill, 60% degradation within 28 days and 100% degradation within 90 days.

  • Reduces: aeration, cavitation, abnormal noises, high fluid temperatures, slow operation and internal leakage.

Put us to the test.

We’re dead set on taking high performance to extraordinary levels, blending NanoProMT’s specially engineered nanoparticles with oils, greases, and fluids to create next generation formulas, and applying our advanced products to take on industry’s toughest problems. We’re even taking on retail lubricants.

We dare you to bring us your toughest, most critical
applications. We’ll prove to you that to go big, you have to go
small, nano small.You have to go with NanoProMT.